CARBON REDUCING TECHNOLOGY

N.A.
1-800-769-2395
USA
1-815-349-7004
Rest of World
1-905-751-1362



THERMOELECTRIC  LOWER TEMPERATURE POWER MODULES  under 200°C SELECTION

Our TEG2 Modules are specially designed for liquid to liquid  thermoelectric power generation.  TEG2 modules are designed for temperatures on Hot Side Below 200°C.

They are soldered on both the hot side and cold side contacts.

At present we have 1 stock TEG2 power module:
For higher temperature go to TEG1 series modules they are designed for up to 320°C
Our highest temperature TEG modules work up to an amazing 800°C with no degradation over 20 years!
TEG2-07025HT-SS      PURCHASE


Features:

1. SnSb 240°C Based solder Hot and Cold side.
2. Ceramic slit for multi thermal cycling applications both hot side and cold side ceramic.
3. Lapped for multiple TEG modules on the same surface.
4. Teflon insulation on the lead wires.
5. Lead wire contacts are attached to cold side for extra protection.
6. Offered in Graphite cover or plain ceramic
7. Highest density heat flux possible in a 40 x 40mm module. Design of module will product the greatest power given the same Delta Temperature (DT).
     of any module commercially available.
8. Ideally suited for liquid to liquid applications because of the exceptional ability for liquid to transfer heat. No other method is able to move heat as fast as liquid!  


                                                                           To order TEG power modules online visit www.tecteg.com
                                                                                           For peltier effect based products visit www.espressomilkcooler.com                                                                      


                                                                        http://www.espressomilkcooler.com/teg___thermoelectric__power_module_selection.htm

                                                                                        MOD. Dec 12/2013

<s
4www.lucanus.ca